WLTOYS 124019/144001 Driveshaft Bearing Support - For High Power/Speed Runs

Description

MADE IN THE USA
Right here in California! - Read The Fitting Instructions Below PRIOR To Purchasing
You are purchasing a centre driveshaft support for a WLTOYS 124019/124018/144001. This support comes complete with 5x11x4 bearing fitted that precisely matches the centre driveshaft. The support is designed so the bearing centre is at the same height as the driveshaft, this eliminates driveshaft flex and vibration at speed and is ideal if you have fitted mod 1 gears to your car or brushless power.
NOTE!
Fitting - You will need to drill two holes in the chassis and remove the centre driveshaft to fit this mount, you will also need to remove the upper plastic brace to use it. However once the centre driveshaft support is fitted the centre driveshaft should not vibrate or flex even with high power applications. A 'Must have' if you are running mod 1 gearing or attempting 100+mph runs to reduce driveshaft flex and vibration. It comes with two threaded holes in the base of the mount that will accept M3 x 10 screws (Supplied). We recommend using a ruler and scribe to draw a line down the centre of the chassis in order to drill your holes so the mount is precisely inline with the driveshaft.
Shipped First class for your security and ours.